What size hole do you drill for a 6-32 tap?

Tap and Drill Size Chart

3-48 .0785 No. 47
4-40 .0890 No. 43
5-40 .1015 No. 38
6-32 .1065 No. 36

Are sink tap holes a standard size?

Standard taps and spouts generally require a hole of at least 22mm in diameter. Monobloc mixer taps, taking both a hot and cold supply, mostly require a minimum 32mm diameter hole.

Do all sinks come with tap holes?

Whilst most kitchen sinks come with a single pre-drilled tap hole for a kitchen sink mixer tap, if you prefer 2 separate taps, you can purchase a sink with 2 tap holes instead.

What is a 6-32 tap?

The 6-32 thread starting tap can be used for cutting new threads or to clean up damaged threads in a previously tapped hole. These taps are made of uncoated high-speed steel and are for use on most metals and plastics.

What size drill bit do you need for a 8 32 tap?

To Tap This Size Screw Or Bolt: Use This Drill Bit: Decimal Inches
8-32 NC #29 .1360
8-36 NF #29 .1360
8-40 NS #28 .1405
3/16-24 NS #26 .1470

What size hole do I drill for a 8 32 tap?

US Tap and Drill Bit Size Table

Tap Fractional Drill Bit Number Drill Bit
#8-32 29
#10-24 5/32″ 25
#10-32 5/32″ 21
#12-24 11/64″ 16

What is a standard size sink hole?

1 3/8 inches
While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.

How do you check tap size?

The easiest way to find out the size of the thread in your mixer tap or faucet is to remove the aerator (this is the part that screws off at the end of your tap) and measure the diameter (across the centre) of the thread.

What does 3 tap hole mean?

You can get basins that feature 3 tap holes which will accommodate 2 separate temperature controls and a spout, giving you a more luxurious finish should you fancy it.

Can you drill a hole in a granite sink?

Granite sinks are unique because the sink and the surround are often one piece. When installing granite, though, you may need to drill a hole in the sink for attachments such as plumbing fixtures.

What is a 6/32 screw used for?

The #6-32 UNC is a thicker screw with a more coarse thread. This makes it more suitable for fastening larger parts and thicker materials requiring increased holding strength. Its larger size and coarse thread make it easier to work with during assembly, with less risk of cross threading.