What is a cold room evaporator?

The evaporator is normally installed on the cold storage room ceiling and equipped with one or more fans which allow air to circulate in the cold storage room. This type of cold storage room is suitable for use in buildings as well as outdoors.

Why the refrigeration unit is outside the cold store?

The evaporator unit is installed inside the walk-in refrigerator/chiller, while the condenser unit is located outside the building or in a plant room to prevent it from generating additional heat inside the building and the cold room.

How does a cold room operate?

Just like any refrigeration system, cold rooms use an evaporator inside the unit and a condenser outside the unit to move heat outside, thus cooling the inside. To help cold rooms operate efficiently, their walls are constructed with insulated walls, floors, and ceilings.

What is the work of evaporator?

The evaporator works the opposite of the condenser, here refrigerant liquid is converted to gas, absorbing heat from the air in the compartment. The evaporator removes heat from the area that is to be cooled. The desired temperature of cooling of the area will determine if refrigeration or air conditioning is desired.

Which gas is used in cold storage?

So far refrigerant used in cold storage is Hydrochloroflourocarbons (HCFC) that is R-22. Chlor is a gas that causes ODP (Ozone Depleting Potential), while Flour is a gas that causes GWP (Global Warming Potential).

Why is my cold room not cold?

Possible solutions are: Storage relative humidity is too low. Clean evaporator coils (if dirty). Increase coil size or install more coils so they can operate at a lower temperature difference between “cold” air leaving the coils and air that the product “feels.” This reduces air dehumidification.

How can I make my room cold without AC?

How to stay cool without air conditioning

  1. Take a cold shower or bath.
  2. Use cold washrags on your neck or wrists.
  3. Use box fans.
  4. Close your curtains or blinds.
  5. Sleep in breathable linens.
  6. Sleep in the basement.
  7. Don’t refrigerate or freeze blankets or clothing.
  8. Close the doors of unused rooms.

How do you keep a storage room cold?

The solution here is simple: clean and maintain your cold room regularly, and keep humidity levels under control—whether that means using a dehumidifier, installing vapour barriers or adding an extra vent. Ideally, you should have two vents in your cold room—one at the top and one at the bottom of the room.

Is R134A gas or liquid?

The R134A can be charged in a liquid or gaseous state, but always following the charging instructions (in a liquid state on the high pressure side and in a gaseous state on the low pressure side with the compressor running).

Which gas is filled in AC?

The most common HFC used in air conditioners is R-410A. This refrigerant is better than R-22 in terms of Ozone Depletion potential and energy efficiency, but it still causes global warming. A few more HFCs that are commonly used are: R-32 in Air Conditioners and R-134A in refrigerators.

How much power does a cold room evaporator need?

This unit needs power in-between 240V to 280V. The capacity of the offered unit is 0.8KW to 160KW. Additionally, the unit uses copper pipes with aluminium fins for transferring vapour. Also, our engineers require 2m2 to 360m2 of area for installing the unit.

Which is the leading manufacturer of cold room evaporator units?

We are a leading manufacturer and exporting of Evaporator Unit. Fan – High reliability, lower temperature resistance and low noise external rotor fans. Coil – High Efficiency heat exchange with in-line tube system for minimum loss of air flow between fans and large surface area for better cooling.

What is the color of a cold room evaporator?

Cases of evaporators are manufactured with material of galvanized steel being endurable against the corrosion and electrostatic powder dyed. In our production, RAL 9010 is used as standard color. The side panels and the drainers are designed to be able to removed easily. Intermediate drain pans are used to prevent air by-pass.

Which is the best mode for a refrigeration unit?

The longer the annual running time of refrigeration unit, the more advantageous the air-cooled condensation mode. Heater defrost refrigerator evaporator is a kind of air cooling equipment suitable for various cold storages,such as frozen room ,quick frozen,cold storages room,fresh-keeping room.