What grade titanium is 6Al 4V?

Grade 5
Properties of Titanium Ti-6Al-4V (Grade 5): Grade 5 Titanium is one of the most popular alloys in the titanium industry and makes up almost half of the titanium used in the world.

How much does titanium tubing cost?


Alloy Location Unit Price
CP2 NY/ON $2.25 US
3Al-2.5V NY/ON $2.10 US
3Al-2.5V NY/ON $1.60 US
3Al-2.5V NY/ON $1.60 US

How strong is 6Al 4V titanium?

Mechanical Properties of Ti-6AL-4V The strength and hardness of the mill-annealed product may be increased by approximately 20% after an aging heat treatment. After aging at 975-1025˚F (524-552˚C), Ti 6al-4v Grade 5 Titanium bar typical yield strength is 150,000 psi and typical hardness is 360 BHN.

How strong is titanium tubing?

Higher Hardness and Tensile Strength Titanium and its alloys have a tensile strength that runs from 20,000 psi to over 200,000 psi. Commercial grade titanium is usually around 63,000 psi.

Are titanium alloys stronger than titanium?

When alloyed with Ti, the resulting titanium alloy is significantly stronger than commercially pure titanium while retaining comparable stiffness and thermal characteristics. It is most often used when no forming is needed because there are better options in formable Titanium Alloys.

What is the hardest grade titanium?

Grade 4
Grade 4. Grade 4 is known as the strongest of the four grades of commercially pure titanium. It is also known for its excellent corrosion resistance, good formability and weldability. Though it is normally used in the following industrial applications, Grade 4 has recently found a niche as a medical grade titanium.

How strong is Grade 9 titanium?

Titanium Grade 9’s mechanical properties offer much more strength than commercially pure titanium. One of the main benefits of this Titanium alloy with 3% Aluminum, 2.5% Vanadium is that it can be cold worked, unlike Ti-6-4, resulting in good ductility, moderately high strength, and excellent resistance to corrosion.

What are the different grades of titanium?

Titanium is available in commercially pure grades and titanium alloy grades. Alloys can be alpha titanium, beta titanium, or alpha-beta titanium. Alpha and beta are the two different phases of titanium. The commercially pure grades are grades 1 through 4.

Is TC4 titanium good?

Titanium is a new type of metal, high strength, corrosion resistance, good low temperature performance, chemical reactivity, thermal conductivity coefficient, elastic modulus is small and so on. TC4 features: Stronger than strength. …

Which grade of titanium is best?

Grade 4 titanium
Grade 4 titanium is the strongest pure grade titanium, but it is also the least moldable. Still, it has a good cold formability, and it has many medical and industrial uses because of its great strength, durability and weldability. Grade 4 titanium is most commonly found in: surgical hardware.

Can you flare titanium tubing?

In addition, titanium is rarely used for the junctures of tubes. In fact, for medical devices in particular — where a lot of machining is required to create flares, swages, and threading at the points of connection — metal of any kind is a very small part of the tube fittings market.

When to use Ti 6AL-4V seawater pipes?

Ti 6Al-4V Pipes have exceptional resistance to erosion in seawater and thus making it a finest choice for its usage in subsea and offshore operations where seawater weathering and weightiness are concerns.

Where can I buy pure titanium tubing online?

Contact us today to learn more. BUY titanium tubing online now by clicking on the link and starting your order. Titanium Processing Center (TPC) is a stocking distributor and service center of commercially pure and titanium alloy products in bar, sheet, plate, pipe, tubing, fasteners, fittings and more.

When to use Ti 6AL-4V Rolled Alloys?

Ti 6Al-4V is the most widely used of all the alpha-beta titanium alloys. It is typically used in the annealed condition, at service temperatures through 750°F.

Which is the best grade 5 titanium tube?

Titanium Grade 5 Tube, also known as Ti6Al4V Tube, Ti-6Al-4V Tube or Ti 6-4 Tube, is the most commonly used alloy. Titanium 6AL4V Tube is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti).