What base goes with the Graco SnugRide 35?

Graco SnugRide Click Connect base
Description. The Graco SnugRide Click Connect base fits the SnugRide 30 and 35 Click Connect infant car seat and is fully optimized for LATCH connection. The base features integrated belt lock-off for easier seat belt installation, including 6-position dial adjustment to make proper installation easier.

Do all Graco SnugRide bases the same?

Are all Graco car seat bases compatible? No, all Graco car seat bases are not compatible with all Graco car seats. Bases must be in the same “family” to be compatible with a car seat. For example, a base with SnugRide SnugLock in the name will be compatible with a car seat with SnugRide SnugLock in its title as well.

Are all Graco products compatible?

Car seats and strollers are only compatible within the same product family. The Classic Connect Stroller is only compatible with the Classic Connect Car Seat. The Click Connect Stroller is only compatible with the Click Connect Car Seat.

How long do Graco click Connect car seats last?

Depending on the model, Graco car seats typically last from seven to ten years. A majority of the Graco infant car seats expire seven years after the date of manufacturing. Most of the convertible car seats expire ten years after the date of manufacturing.

How do I remove the base from my Graco car?

To remove the base from a Graco car seat, you need to raise the carrier’s handle. Then, push the handle in and pull it into an upright position. You have to squeeze the base release handle from the back of the car seat. Once you’ve done this, lift the car seat out of the base.

How do you unlock a car seat from the base?

Grab the release button on the bottom of the car seat and squeeze. The button is located either near your infant’s feet or behind his head. Pull up on the carrier until it releases from the base. If you cannot get the car seat loose, replace it in the base.

How to attach Graco SnugRide click connect 35 without the base?

Follow these 6 steps to attach the SnugRide Click Connect 35 without the base: Place the infant car seat rear facing in your car. Recline the seat appropriately by following the level line indicator on the side of the carrier. You might need to place a towel between the car seat and your car to achieve the right position.

Are there any good reviews for the Graco SnugRide?

The Graco SnugRide Click Connect 35 reviews on Amazon and other popular retailers are usually divided between people who are perfectly happy with the seat and others who hate it. Every infant car seat sold in the U.S. complies with Federal safety standards. BUT, this won’t help you if your car seat isn’t installed properly.

How to check the Graco SnugRide car seat base?

Inspect the Graco Snugride’s level indicator to make sure that the car seat base is level. The level indicator will read all blue if the Graco Snugride is level. If the car seat base is not level, adjust the foot of the car seat base to make it sit level on the vehicle seat.

How does the SnugRide infant car seat base work?

The SnugRide SnugLock infant car seat base is design simply. The Instructions are very easy to understand. The SnugLock technology makes it so easy to install. You will get a secure installation with both the latch and seat belt in a matter of seconds. The level indicator gives an accurate showing of installing at the correct angle.