Trending

How do I program my spectrum rc122 to my cable box?

How do I program my spectrum rc122 to my cable box?

Press 991 and point the remote towards your device, and then press the Play button once. Press the Select/OK button as soon as the device goes off. To verify if the new code is correct, press the Power button. If the device turns on, press the Select/OK button to assign the code successfully.

How do you program a spectrum rc122 remote?

Programming Your Remote

  1. Turn on the device, such as your TV, that you want the remote to operate.
  2. On your remote, press the corresponding device button [such as TV, DVD, CBL] and the SELECT/OK buttons simultaneously until all the device buttons blink twice.
  3. Point the remote at the device and press 9 9 1.

How do I program my Time Warner universal remote?

Programming Your Remote

  1. Turn on the TV you want to program.
  2. Press and hold the Menu + OK buttons simultaneously until the Input button blinks twice.
  3. Press TV Power. The Input button should light up solid.
  4. Aim the remote at your TV and press and hold the UP arrow.
  5. Once the device turns off, release the UP arrow.

What are the codes for spectrum remote?

Following are the remote setup codes for all the popular brands:

  • Dynex: 12049, 11463.
  • Insignia: 12049, 11423, 11564, 10171, 10463, 11204, 11326, 11385, 11517, 11641, 11660, 11892, 11963, 12417, 12751.
  • JVC: 10650, 11774, 10463, 11923, 12321, 13393.
  • LG: 11423, 10178, 10017, 10442, 12864, 12867.

How do I fix the volume on my spectrum remote?

Spectrum Remote Volume Not Working

  1. Disconnect your devices from your spectrum remote.
  2. Unplug the power cables from your devices.
  3. Remove batteries out of your spectrum remote.
  4. Leave everything off and unplugged for three to five minutes.
  5. Reassemble and switch on your devices and remote.

How do I fix my spectrum remote change channels?

Troubleshooting Steps

  1. Replace your batteries.
  2. Make sure your Spectrum Receiver (cable box) is turned on.
  3. Change channels by pressing the buttons on your receiver (if available).
  4. Remove any objects (e.g. furniture) around your receiver.
  5. Position your receiver at a different angle so it can detect your remote.

How do you reprogram a TV remote?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I program my Time Warner remote control to my TV?

Hold the “Setup” key down on the remote until the “TV” button blinks twice. Then, release “Setup.” Type the programming code “9-9-1” via the remote’s number pad. Aim the Time Warner remote at the television set.

How do I connect my remote to my TV?

Press the (Quick Settings) button on the remote control. Select Settings….The next steps will depend on your TV menu options:

  1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
  2. Select Remote control — Connect via Bluetooth.
  3. Select Voice Remote Control — Activate button.

Why is my spectrum remote volume not working?

Unplug the power cables from your devices. Remove batteries out of your spectrum remote. Leave everything off and unplugged for three to five minutes. Reassemble and switch on your devices and remote.

What kind of remote do I need for Time Warner Cable?

I recently upgraded my Time Warner cable box and with it came the Philips RC122 remote. (I have to say this remote is a step backwards from my old remote in that it doesn’t have a ‘system’ on/off button. I need to individually turn on/off the TV, the cable box, and the Bose sound system. But I digress…)

Can a Phillips rc122 be used as a TV remote?

This should help! The RC122 is one of the most TV unfriendly remotes out there from personal experience. If possible see if you could get a UR5U-8780 as that has much more compatibility with TV manufacturers. Above instructions on programing the Video Source/Input Button should still apply with the UR5U-8780 remote.

What are the codes for the Philips spectrum remote controls?

Spectrum codes: 3 digit 4 digit 5 digit Most models RC122 AT8560 Cisco DTA Four digit TV, Audio, DVD, VCR, DVR, HTiB and Cable Box codes for Philips RC122 Charter Spectrum (former Time Warner) universal remote controls.

What are the universal remote codes for TVS?

Jump to the MOST COMMON UNIVERSAL REMOTE CODES FOR TV here:The most common 2, 3, 4, and 5 digit universal TV remote codes can be found on the following pages: 2 digit TV remote codes, 3 digit TV remote codes, 4 digit TV remote codes, and 5 digit TV remote codes.