How do I change the bulb in my Sony KDS 60a2000?

Remove the lamp door. Turn the screw counterclockwise and slide the lever to the left. Remove the door….Remove the door.

  1. Pull out the Sony XL-5200 lamp.
  2. Do not shake the lamp.
  3. Avoid touching the front glass of a new lamp.

How do I reset my Sony TV after replacing the lamp?

How to reset the lamp timer.

  1. Using the supplied remote, press the Menu button.
  2. Using the directional arrows select Settings.
  3. Press the Select button.
  4. Select Setup.
  5. Press the Select button.
  6. Using the down arrow to scroll down and select Reset Lamp Timer.
  7. Press the Select button.
  8. Select Yes.

What does LAMP mean on a Sony TV?

The indicator light labeled “Lamp” on the front of the TV will turn red and start flashing. This is one of the first indications that you need to replace the bulb in your Sony Wega TV.

How do you reset the lamp timer on a Sony TV?

How do I unfreeze my Sony TV?

Restart the TV with the supplied remote control:

  1. Press and hold the POWER button until Power off appears on the screen.
  2. Press and hold the POWER button until a menu appears → select Restart.

How long does a factory reset take on a Sony TV?

Note: It will take approximately 10-30 seconds for appearing Erasing screen. Release the buttons after Erasing screen appears. Note: If Erasing screen doesn’t appear within 60 seconds, start from Step 1 again. Wait a few minutes for the Factory data reset process to take place.

Why is there an orange light on my Sony TV?

When the Timer function of the Androidâ„¢ TV is activated, the illumination LED will light up in amber or orange. NOTE: Setting the Illumination LED function to Off will totally disable the illumination LED regardless of how the TV is being operated.

Why does my Sony TV keep switching off?

If your TV turns on or off at regular intervals, such as 30 minutes to an hour, it’s likely caused by power saving functions such as Idle TV Standby, On Timer, and Sleep Timer. If the TV turns on or off when an HDMI-connected device is powered on or off, check the Bravia Sync settings.