By How do you reset a Zepp sensor?
To complete a hard reset of the Zepp 2 sensor make sure the sensor is powered off, then press and hold the multi-function button for approximately 10 seconds. After holding for about 10 seconds the sensor LED will flash white. Make sure to let go of the button while the sensor is still flashing white.
Why is my Zepp app not working?
Go to your phone settings, find app notifications, toggle off and on, reboot your phone, restart Zepp app and try again. If you are using an iPhone, please go to iPhone Settings > Notifications > Messages/Zepp app >Toggle on all the alerts. And please make sure you have enabled other in Zepp app.
How do I turn on my Zepp sensor?
Pair your Zepp Sensor with your iOS or Android device To begin, charge your Zepp Sensor for 2-3 hours to ensure a full charge. Next, turn on your sensor by pressing the side of the multi-function button and holding for four seconds. A running LED light will indicate that the device is on.
How do I restart my Zepp app?
To complete a hard reset of the Zepp sensor press and hold the multi-function button for approximately 10 seconds while the sensor is powered on. During this time the sensor will power off, continue holding multi – function button until all 10 LEDs lights become solid.
How do I turn on my Zepp Sensor?
How do I connect my Zepp to my phone?
To pair the sensor to your mobile device, tap on the name of your sensor in the Bluetooth list, which will usually have “Zepp” followed by a letter with 2 digits. At this point your sensor will be connected to the Zepp Baseball or Zepp Golf app!
How do I pair my Zepp?
To begin the pairing process, open your Settings Menu and select Bluetooth. If Bluetooth is not enabled, turn it on. If you are using an iOS device, it will automatically search for Bluetooth devices, and “Zepp” will appear in the list of devices available to pair if the sensor is powered on and nearby.
How do I turn off the Zepp sensor?
Hold power button for at least 4 seconds and the white LED will blink twice. To turn the sensor off, press and hold the power button for 4 seconds. The white LED will appear once and slowly fade away indicating that the sensor is turning off.
How do I connect my Zepp to my Iphone?
How does the Zepp sensor help your swing?
Every day at the range with this app and the sensor produces valuable insight in to my swing. Every swing allows for immediate adjustment; truly helping me get my hands and club on plane. 90 days of usage now and my swing has improved immensely. Finally getting the ball flight and distance I always wanted.
How to hard reset the Zepp sensor in Windows 10?
1 Hard reset the Zepp sensor. To do so, make sure the sensor is powered on and then press and hold the sensor button… 2 Once the LEDs freeze, let go of the sensor button and the sensor will turn off. 3 Once the hard reset is complete and the sensor is off, hold the sensor button for a full 20 seconds. Once you see 2… More
Why is my Zepp sensor showing alternating LEDs?
If you see two LEDs alternating on the sensor, this means that the sensor is stuck in a firmware update. Before we start troubleshooting, please make sure that your sensor has a decent battery charge. If the alternating LED pattern has drained the battery, please make sure to put the sensor on the charger and leave it on for a full 2-3 hours.
How do I connect my Zepp golf to my iPhone?
Select the Settings icon and then select Bluetooth. If Bluetooth is not enabled, turn it on. Your iOS device will automatically search for Zepp. This will take approximately 15-30 seconds. Once found, a pop up “Bluetooth Pairing Request” will appear. Select Pair. When paired, your device will note Zepp “Connected”.