By How do I fix error code 5b02?
Steps to Fix Canon Printer Error Code 5b02
- The first step is to unplug the power cord from the printer and from the power source as well.
- Now remove all the wired connections to the printer including all the USB cables (if attached).
- Press and hold the Start button.
- Now plug in the Canon Printer again.
How do I reset my Canon ink absorber?
Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.
Where is the waste ink absorber on a Canon printer?
2 Locate the waste ink absorbers in their black rubber frame. They will likely be on the right side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode.
Why is my printer showing error?
If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.
How do I clear error code 5b00 on my Canon printer?
How to fix Canon printer error 5b00
- Step 1: Unplug the device.
- Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
- Step 3: Hold the power button until the printer starts resetting itself.
- Step 4: Wait for the green power light in the printer to turn off.
How do I fix Canon 5011 error?
Fix: Canon Printer Error 5011
- Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
- Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
- Then close the lid and see if that fixes the issue.
How do I fix my Canon B204 error?
If the B204 error returns, please try 2 new ink cartridges. If the issue persists, your PIXMA MX492 would require service. You are eligible for Canon’s Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system.