By Can you tell axle ratio from Vin?
Contact the dealer or the manufacturer (you could get a customer service number from the owners manual of the truck) and give them the VIN number and tell them you wish to know the axle ratio. They may only need certain digits from the VIN to determine, but it’s better to have them all in case.
How do you read a Ford axle code?
If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code.
Do axles have VIN numbers?
The VIN number on a trailer is likely found: Near an axle on the frame. On the inside or underside of the frame near the front.
How do I find out what my axle ratio is?
Method 1: Count the number of teeth on the ring gear and the pinion. Divide the number of the ring gear’s teeth by the number of the pinion’s teeth. This will give you the axle ratio.
How do I know my rear axle ratio?
Mark the wheel and the drive shaft with chalk or masking tape. Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio.
How do I identify my Dana axle?
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
Where do I find my axle code?
Open the front door on the driver’s side. Locate the Truck Safety Compliance Certification Label on the door pillar near the door latch. Locate the two-digit code in the box labeled “AXLE,” which is just below the bar code.
How do I identify my axle?
What axle ratio do I have?
Here are two ways to find the axle gear ratio of a vehicle: Method 1: Count the number of teeth on the ring gear and the pinion. Divide the number of the ring gear’s teeth by the number of the pinion’s teeth. This will give you the axle ratio.
How do you decode a GM VIN number?
GM’s format is as follows:
- 4th digit: Model platform code.
- 5th digit: Model series code.
- 6th digit: Body style.
- 7th digit: Restraint type (seatbelts and airbags)
- 8th digit: Engine type.
- 9th digit: Check digit.
- 10th digit: Model year.
- 11th digit: Factory ID.
What kind of VIN does a Ford truck have?
The section below is a break down of Ford truck VIN’s. If you have a 2000-2020 Ford car, SUV or truck, you may want to use the appropriate VIN guide linked below: Here Is A Sample Ford V.I.N. To Break Down: Using the sample V.I.N. given, you can see that this vehicle is: Check out the NHTSA VIN DECODER webpage.
Can you tell the axle ratio from Vin?
Thats just it.My rear diff is completely seized.I’d normally rotate it and count the teeth on the ring gear vs the pinion but I can’t turn the pinion.Every truck I look at for parts has the wrong gear ratio.Mine is a 4×4 so I need to match’er up. Well, if its completely siezed, you probably have nothing to lose by pulling it.
Where do you find the Axle code on a Ford truck?
There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code. Here are some examples of actually stickers:
Where can I find the VIN on my Ford Explorer?
The VIN also allows a user to get a build sheet of Ford EXPLORER. Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number. It is possible to get market price of new or used Ford EXPLORER by VIN number.