How do I change the code on my Kwikset lock?

How do I change the code on my Kwikset lock?

How do I reset a code on my Powerbolt?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do I set my Kwikset Smart Lock?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep.

Why is my Kwikset lock blinking red?

What Do The Different Colored Lights On The Status LED Mean for my Premis Lock? Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.

How do I know my Kwikset Smart Lock?

If you’re not sure about your own lock, take a close look at it and see if there’s a tiny oval hole next to the keyhole. If so, then it’s a SmartKey lock.

How do you remove a code from a Kwikset lock?

Delete A User Code:

1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
3. Press 2 to delete a user code.
4. Press Kwikset.
5. Enter the user code you wish to delete.
6. Enter the user code again.
7. Press Kwikset.

How do you reset a Kwikset push button lock?

A factory reset will delete all codes associated with the lock.

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

What is the master code for Kwikset lock?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

Why is my Kwikset lock not pairing?

My Lock Won’t Pair Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. View button locations for your Lock model.

Where is the reset button on Kwikset lock?

How to Factory Reset a Kwikset Smart Lock

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.

How do you reset a Kwikset Smart Lock?

1 Factory Reset

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do you reset a Kwikset lock without the code?

You may reset the lock by pressing the Premis Button “A” on the back panel for 20 seconds.