Why does my paslode not fire?

Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The nailer needs cleaned – especially if it has been used a lot without regular cleaning!

How long is paslode warranty?

5 years
all moulded nylon components on Paslode Impulse tools will be free from manufacturing defects in workmanship and materials for a period of 5 years from the date of purchase of the relevant product.

Why is my paslode charger flashing red and green?

Look at the lights on the charger unit – an alternating flashing red and green light means that the battery is faulty. In this instance take the battery back to the dealer that you bought it from and they should be able to help you.

Can you use wd40 on a Paslode?

wd40 just clogs everything up. the paslode cleaner is just the same as brake part cleaner that you would use on your car. you can get it cheaper than paslode cleaner at your local motor factors. spray it all over to remove old oil and dust ,leave for 5 mins and re-oil.

How do I know if my paslode battery is bad?

If the battery is damaged, the red indicator light on charger does not flash when you try to charge the battery. If the battery isn’t accepting a charge when you mount it on the charger, you must replace it. A new battery doesn’t come fully charged, so charge it before inserting it into the Paslode.

How do you clear a stuck paslode?

How to unjam a nail gun:

  1. Unscrew the two front nose bolts, or lift the nose latch, releasing the front nose plate.
  2. Open the nose.
  3. Clear the jam and push the driver blade back to its rest position.
  4. Close the front nose and refix it.
  5. Ensure the work contact element is free.
  6. Reinsert the battery and the fuel cell.