Why does my boiler say E1 33?
What do Baxi error codes E133 or E28 mean? If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen. Switch your boiler off at the control panel, and turn off the electricity at the wall. Find where the pipe is frozen, usually the most exposed part of the pipe.
What does E1 31 mean on a boiler?
E20 – Boiler temperature sensor fault. E119 – Water pressure switch cut out (low water pressure in boiler and system) E125 – Boiler max temperature exceeded – possible circulation fault. E130 – Flue gas max temperature exceeded – check connections and flue NTC. E131 – Power has been turned off during E125 or E130 …
Why is my boiler flashing 133?
What does the 133 fault code mean on my Baxi boiler? When a boiler fires up, a flame detection signal is passed on to the PCB (the boiler’s circuit board). When the 133 fault code is displayed, that’s signifying that the flame has not been detected.
What does e33 mean on a Baxi boiler?
posted on 11 Jan 2020. E133 error code on a Baxi/ Potterton / Main boiler is an ignition lockout fault code. This error code that covers a wide range of possible faults connected to gas and igniton.
What does Error 1 mean on a boiler?
The F1 error code tells you that your boiler is losing pressure and is now low on pressure. This may be caused by: Water leaking from the pipes. Water leaking your radiators. A leak in the the boiler itself.
How do I fix error code 168?
The following steps should fix the error 168 issue:
- Install and launch the application.
- Click the Scan Now button to detect issues and abnormalities.
- Click the Repair All button to fix the issues.
What does E 10 mean on a boiler?
If you have got low boiler pressure, then your boiler probably shows an E10 fault code. That means that you have lost too much pressure. This indicates that there is a heating system leak somewhere in your home heating system.
How do I reset my Baxi Megaflo compact?
To reset the boiler, turn the selector switch to the R (Reset) position. Hold for at least 5 seconds and release. The fault code will be replaced with the boiler’s current temperature. At this point on a neon indicator boiler model, the flame failure light will stop flashing and will be replaced with the burner light.
Why is my Baxi boiler flashing?
1 red flash means there could be temperature, sensor or flow faults. You will need an engineer to locate the issue. 2 red flashes is a sign your boiler has overheated. Try bleeding your radiators before calling an engineer.
Why do I have to keep resetting my Baxi boiler?
If you find that you keep having to reset your boiler, it’s likely that there could be a fault with your heating system. This fault could eventually lead to a more serious issue such as a boiler breakdown, so it’s best to seek out a solution as soon as possible.
What are the boiler error codes for Baxi?
BAXI 200 COMBI / BAXI 400 COMBI Boiler Error/Fault Codes Error Code Possible Fault E.01 – .17 Permanent Fault Requiring Reset – No cir E.01 – .20 Permanent Fault – Maximum flue gas tempe E.02 – .00 Permanent Fault – Boiler reset in progre E.02 – .07 No or low system water pressure. Low sys
What is a temporary fault code on Baxi?
Temporary Fault – Maximum difference between the flow and return temperature exceeded. Non-existent or insufficient circulation. Sensor error. Log into baxiworks.co.uk for more information about this error code. Temporary Fault – Flow temperature increasing too fast in heating mode. Non-existent or insufficient circulation. Sensor error.
What do the red flashes mean on a Baxi boiler?
Boiler temperature reached. No action required. Temporary flame loss. Boiler will self reset, if fault continues you will see 3 red flashes. Communication error between printed circuit board (PCB) and control. Temporary error, will self reset. Parameter error on printed circuit board (PCB).
Is there a problem with my Baxi 105E combi boiler?
Hopefully that should solve the problem. If your Baxi 105e combi boiler is failing to provide you with hot water, or the water is only heating up when the central heating is turned on, it could be a problem with your diaphragm washer. The Fix: The diaphragm washer can be replaced using a service kit.