By What size is a Borg Warner S475?
75mm comp. Wheel Inducer Diameter. 84mm Turbine Wheel Outer Diameter.
What size is a S475 Turbo?
In the tail of the tape, the S475 offered a 75mm, cast compressor wheel, standard compressor housing, an 83mm turbine wheel, and 1.0 AR, T4 turbine housing. By contrast, the S480 featured an 80mm billet compressor wheel, standard compressor housing, 96mm turbine wheel, and 1.25 AR T4 turbine housing.
How big is a S400 Turbo?
High-flow S400 model, with compressor flow over 105 lb/min. Wheel Dimensions: Compressor: 74.7 mm inducer, 100.8mm exducer, with exclusive Extended Tip Technology. Turbine: 83mm inducer, 74mm exducer.
How big is a T6 turbo?
Which size do you need?
| Turbo | Circumference | Width |
|---|---|---|
| T3 | 38 ~ 41cm | 5 cm |
| T25 / T28 | 38 ~ 41cm | 6 cm |
| T4 | 51 ~ 56cm | 7 cm |
| T6 | 66 cm | 9,5 cm |
What is the biggest turbo?
Honeywell announces the release of the Honeywell Garrett GTX 5533R Gen II turbocharger, its most powerful turbo ever produced.
What’s the most expensive turbo?
All total, the most expensive 911 Turbo S will cost you $273,610, and we didn’t include Porsche’s delivery experience which adds another $925 if you go to Atlanta, or $1,045 to take delivery in Los Angeles. The options alone totaled $56,060, which equates to well-equipped Toyota Supra.
What is the difference between a T4 and a T6?
The main difference between the two thermostats is that T6 is a smart thermostat that can be controlled remotely through the Honeywell Home app and also has a geolocation based schedule. The T4 is a non-connected programmable thermostat that can be programmed and controlled only from the unit itself.
How big is a T6 flange?
T6 Divided Turbo Flange has 10 mm x 1.5 mm threads and is used on all large frame turbo using the bolt pattern 2.75″ x 4.43″ with divided turbine housing inlet. The flange is made 10mm thick material to ensure no warpage under high loads or high temps.