How much horsepower can I get out of a 360?
After-market support for the 360 is great, and with the right parts, it can easily make 450 horsepower and still have great street manners. If you need more inches, it’s easy to drop in a stroker crank and get 406 cubic inches.
How much horsepower does a Dodge 360 Magnum have?
|Engine model||Chrysler 5.9 L (360 cu in) Magnum|
|Fuel system||Multi-point Fuel Injection|
|Power output||From 234.0 PS (172.0 kW; 230.0 HP) at 4,000 rpm to 249.0 PS (183.0 kW; 245.0 HP) at 4,000 rpm|
How much HP can a 5.9 Magnum handle?
The Engine Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.
Is a Dodge 360 a good motor?
The Dodge 360 is a good motor, not a ton of power but reliable, its everything else you need to be worried about.
How can I get more horsepower out of my Dodge 360?
The power output of the 360 Magnum engine can be increased with performance aftermarket modifications.
- Install a performance aftermarket cold-air intake system.
- Upgrade to performance aftermarket headers.
- Install a performance aftermarket exhaust system.
How reliable is the 5.9 Magnum?
Overall the 5.9 Magnum can be a reliable engine with proper maintenance and care. Reliability reviews tend to be mixed, with a lot of people reporting no issues at all. However, the ones that do report issues tend to report a lot of issues.
Is the Dodge 5.9 Magnum a good engine?
Dodge 5.9 Magnum Reliability Overall the 5.9 Magnum can be a reliable engine with proper maintenance and care. Reliability reviews tend to be mixed, with a lot of people reporting no issues at all.
How long will a 5.9 Magnum last?
If maintained, it seems that 200,000 to 300,000 seems about right. It all depends on how well it has been taken care of. And there were two main issues with the magnum motors. The aluminum on steel belly pan caused the gasket to blow out.
How can I get more power out of my 5.9 Magnum?
How long will a Dodge 5.9 Magnum last?
If maintained, it seems that 200,000 to 300,000 seems about right. It all depends on how well it has been taken care of. And there were two main issues with the magnum motors.
Is a 318 and 360 the same block?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
What engine is better 318 or 360?
the 318 engine has been known to be very reliable and I haven’t had any problems with mine and the 360 has a little more power and may get a little worse gas mileage but will move the truck a little better, but both a great for towing.
What kind of engine does a Dodge 360 have?
Luckily, Richard Holdener is about as anti-brand-fanboy as they come. As such, he has this LA-series 360 engine out of his 1975 Dodge Tradesman van with which to conduct his usual dyno experiments on.
What are the dyno proven 360 packages for Mopar?
Edelbrock RPM heads, RPM intake, Performer 750 carb and RPM camshaft with .488″ lift and 308 advertised duration, installed at 110 intake centerline. Timing was set at 34 degrees total. Package five-B: The above motor was tried with a modified Holley carb flowing over 800 cfm and having .076″ front jets and .080″ rear jets. Package six:
What kind of motor is in a dyno 360?
Here you are. These are proven dyno tested motors so you have no guess work at all. Rebuilt 360 with factory crank and rods. Cast 9 to 1 compression flat top pistons. Heads are “308” swirl port heads from 1988-91, rebuilt with competition valve job and a slight mill to true up the surface.
What do you need for a 360 dyno test?
I have seen many 360 dyno tests that show this same combo will duplicate the 450 – 460 h.p. every time. You need ported heads, RPM intake, MP .484″ cam, well tuned carb and good dyno tuning and you will get 450+ h.p. every time.