Table of Contents

## How much does it cost to build a 12 by 12 patio?

Ground Patio Most patios are built on the backyard lawn. A ground patio will cost anything between \$750 and \$7,200 for a 12-by-12-foot area. You’ll also have to factor in the cost to level the ground before you build, if necessary.

### How many pavers do I need for a 12×12 patio?

So, assuming your paver size is 12″ x 12″, multiply 12×12 and then divide 144 by the answer. You’ll find that 144 ÷ (12×12) = 1.0. That means you need one paver per square foot, which makes sense since a 12″ x 12″ paver is 1 square foot.

#### How much should I pay for a brick patio?

A mortar-set brick patio costs about the same as bluestone: around \$20 per square foot, installed. (Most bricks cost from \$1 to \$1.20 each; you need about four and a half bricks per square foot.) A sand-set patio will cost you less: from \$12 to \$15 per square foot.

How much does a 20×20 patio cost?

How Much Does a 20×20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from \$1,900 to \$6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs.

What is the cheapest patio to build?

Concrete patios are typically one of the least expensive to build. Assuming proper installation and maintenance, they are one of the most durable, too, though like brick, concrete is subject to cracking with freeze-thaw cycles. Since poured concrete follows any form, unlimited patio design options are possible.

## What is the cheapest material for a patio?

Concrete
Concrete is one of the most popular patio materials and the cheapest material you can use to build a hard-surface patio. Concrete is made of aggregates and paste—concrete aggregates can be crushed stone, sand, gravel, or even shells; the paste is made up of water and cement.

### What is the cheapest material to use for a patio?

#### What is the cheapest material to build a patio?

Concrete is one of the cheapest and most popular materials that can be used to build a hard-surface patio. The aggregates of concrete can be stone, gravel, sand, or shells, which are mixed with water to form a paste that dries into a hard surface when left to settle.

Can you lay pavers directly on dirt?

Typically, it is not recommended to directly lay down pavers over dirt. For pavers to look and perform well in a permanent installation setting, the ground/dirt floor must be excavated, leveled, and hard compacted.

What type of patio lasts the longest?

For patio installations, experts recommend either stone or concrete pavers, which, due to their higher density, may be expected to last longer and undergo less color fading than other paver types.