By How do I reset my Cisco access point to factory settings?
Factory Reset via MODE Button Press and hold the MODE button while you reconnect power to the access point. Hold the MODE button until the Status LED turns amber (approximately 1 to 2 seconds), and release the button.
How do I reset my Cisco modem?
Using the modem’s Reset button:
- Locate the Reset button the back of the modem.
- Press and hold the Reset button for 10 seconds.
- After 10 seconds, release the button. The modem should restart and the lights will flash.
- Once the modem is finished restarting and is online the settings will be back to default.
What is the default IP address for a Cisco access point?
192.168.1.245
If the wireless access points do not receive a DHCP response (there is no DHCP server on your network) after 60 seconds, the access points will fallback to the following default static IP address: 192.168. 1.245 and a default mask of 255.255. 255.0.
What is the default password for Cisco access point?
In the absence of a DHCP server, the access point will fallback to the default static IP address after 60 seconds. Step 3. Login with the default credentials. The default username is cisco, and the default password is cisco.
How do I reboot my access point?
To restart an AP, expand the Access Points section, click the AP’s box on the left side, then click Restart.
Where is the reset button on a Cisco router?
Press the Reset button located at the back of the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The Router reloads and is set to the default configuration settings.
How do you reprogram a Cisco router?
Reset Router Using Reset Button
- With the router powered off, connect the power cord to your router, and plug the power cord into your power source.
- Find the Reset button on the router.
- Press and hold the Reset button while you power on the router.
- Release the Reset button after 10 seconds.
How do I log into my Cisco access point?
The access point login window appears and you must log in to the access point again. The default username is Cisco (case-sensitive) and the default password is Cisco (case-sensitive). To display the access point’s security certificate, click the Certificate error icon in the address bar.
What is the configuration utility for the ap541n?
The AP541N Wireless Access point has a web configuration utility which is known as the Access Point Configuration Utility. The Access Point Configuration Utility is a Graphical User Interface (GUI) that gives an administrator a tool that is easy to use and contains all the possible features that can be changed to modify the performance of a device.
What is the default password for Cisco Access Point?
Default Username: cisco. Default Password: cisco. Note: The default IP address of the Access Point is 192.168.10.10. If no webpage appears, try to reset the IP address. In order to reset the IP address, hold the reset button for 30 seconds.
How to reset the IP address of an access point?
In order to reset the IP address, hold the reset button for 30 seconds. This resets the default IP address as well as all other settings to factory defaults. Alternatively, you can manually configure the IP address of the host computer to be on the same subnet as the Access point if it is known.
What is the default IP address for Cisco?
Here is the default IP address, username, and password of the Access Point. Default IP Address: 192.168.10.10. Default Username: cisco. Default Password: cisco. Note: The default IP address of the Access Point is 192.168.10.10. If no webpage appears, try to reset the IP address.