How do I pair my Sony SA CT370?

Table of Contents

To pair with the wireless subwoofer, press “amp menu” on the remote, toggle to the “WS” setting and start the link process. On the back of the subwoofer, press the “link” button, and the two should connect. The HT-CT370 can pair with a mobile device or computer via Bluetooth for music playback.

Is there a reset button on a Sony soundbar?

Press the MENU button on the remote control. Select RESET by pressing the ↑ (upper) or ↓ (lower) button. When ALL RESET appears on the front panel display, press the ENTER button, and then the system settings return to the factory default.

How do I reset my Sony subwoofer?

Press and hold the (power) button of the subwoofer and rear speakers for more than 10 seconds. Disconnect the AC power cord, and then plug it back in….HT-CT790 / RT5 / NT3 / ST9:

Press the HOME button.
Select Setup.
Select Resetting.
Select Reset to Factory Default Settings.
Select All Settings.
Select Start.

Why is my Sony sound bar not working?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to TV input. Change the TV audio output setting to PCM and check whether sound is output.

How do I put my Sony Soundbar in pairing mode?

On your soundbar, press and hold the BLUETOOTH button for two seconds.

Your soundbar enters the pairing mode.
The Bluetooth indicator flashes quickly.

How do I pair my Sony subwoofer?

Place the subwoofer close to the sound bar in a room….Link the soundbar and subwoofer.

On the supplied remote control, press the AMP MENU button.
Select WS.
Press the Enter button.
Select LINK or S.
Press the Enter button.
After START appears, press the Enter button to allow the soundbar to search for the subwoofer.

How do I reset my Sony sound system?

Unplug the power cord and confirm that the STANDBY indicator is not lit. Then pluh back in the power cord and turn on the system. At the same time, press and hold the FUNCTION and ON/Standby buttons until RESET appears on the display window.

How do I reset my Sony Bluetooth soundbar?

If the issue still occurs, follow these steps to reset your soundbar:

Press and hold the (power), (input select), and + (volume) buttons at the same time for more than five seconds.
Unplug the power cord and plug it back in to a working outlet.
Turn on your soundbar.

Why subwoofer is not working?

Check to make sure that cables are firmly connected and plugged into the correct spots. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.

Why is my wireless subwoofer not working?

Wireless transmission issues that result in no sound from the subwoofer are generally caused by connection or interference issues. The on/standby indicator on the subwoofer is a good starting point for troubleshooting.

How do I reboot my Sony TV?

How do I reset my Sony television to factory settings?

Step 1: open the menu. On the remote, press the HOME button.
Step 2: open Settings.
Step 3: select Storage & reset.
Step 4: select Restore factory settings.
Step 5: select Erase all data.
Step 6: confirm the reset.

How do I reset my Sony receiver?

Press and hold down the MUTING and MUSIC buttons. While holding down the MUTING and MUSIC buttons, press and release the POWER button to turn the A/V receiver on. Wait approximately 5 seconds and then release the MUTING and MUSIC buttons.