How do I access HP RAID configuration utility?

To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration. Exit ILO, and next you’ll get the RAID configuration options.

What is ROM based setup?

RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of configuration activities that can include the following: Configuring system devices and installed options. Enabling and disabling system features. Displaying system information. Selecting the primary boot controller.

How do I configure RAID HP ProLiant?


  1. Start or restart the HP server.
  2. At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
  3. Provide credentials at the login prompt.
  4. Press Ctrl+S to open the Intel Boot Agent Setup Menu.
  5. Press F8 to open the ROM Array Configuration menu.
  6. From the Main Menu, select Create Logical Drive and press Enter.

How do I run HP Array Configuration utility?

ACU is now available as an embedded utility, starting with HP ProLiant Gen8 servers. To access ACU, use one of the following methods: If an optional controller is not installed, press F10 during boot. If an optional controller is installed, when the system recognizes the controller during POST, press F5.

How do I configure RAID?

The RAID option must be enabled in the BIOS before the system can load the RAID option ROM code.

  1. Press F2 during startup to enter the BIOS setup.
  2. To enable RAID, use one of the following methods, depending on your board model. Go to Configuration > SATA Drives, set Chipset SATA Mode to RAID.
  3. Press F10 to save and exit.

How do I create a RAID configuration?

Configuring RAID in Windows 10

  1. Type or paste ‘Storage Spaces’ into Search Windows.
  2. Select Create a new pool and storage space.
  3. Select the RAID type under Resiliency by selecting the drop down menu.
  4. Set the drive size under Size if necessary.
  5. Select Create storage space.

Is ROM a memory?

RAM, which stands for random access memory, and ROM, which stands for read-only memory, are both present in your computer. RAM is volatile memory that temporarily stores the files you are working on. ROM is non-volatile memory that permanently stores instructions for your computer.

How do I access HP Rbsu?

HPE ProLiant Server – Unable to Access the ROM Based Setup Utility (RBSU) in Full-Screen Menu-based Mode

  1. Type “SHOW CONFIG BIOS INTERFACE MODE” at the “rbsu” prompt.
  2. Type “Set Config Bios Interface Mode 1” to select the first option.
  3. Type “Exit” at rbsu prompt.
  4. Reboot the server and Access RBSU by pressing F9.

What is the best RAID configuration?

RAID 10 is a combination of RAID 1 and 0 and is often denoted as RAID 1+0. It combines the mirroring of RAID 1 with the striping of RAID 0. It’s the RAID level that gives the best performance, but it is also costly, requiring twice as many disks as other RAID levels, for a minimum of four.

What is the difference between RAID 1 and RAID 0?

The main difference between the RAID 0 and RAID 1 is that, In RAID 0 technology, Disk stripping is used. On the other hand, in RAID 1 technology, Disk mirroring is used. RAID 0 stands for Redundant Array of Independent Disk level 0. While RAID 1 stands for Redundant Array of Independent Disk level 1.

How do I open the HP Smart Storage Administrator?

On the local server (host), click Start, and then select Programs; Windows System; Smart Storage Administrator; Smart Storage Administrator Preferences.

What is Array Diagnostic Utility?

The HP ProLiant Array Diagnostics Utility for Windows is a web-based application that creates a report of all HP storage controllers and disk drives. This report provides vital information to HP service personnel to assist in identifying faults or conditions that may require attention.

How to create a RAID volume on a HP workstation?

To create RAID volumes, use the Intel Rapid Storage Manager option ROM Configuration utility. To enter the Intel Rapid Storage Manager option ROM Configuration utility, press Ctrl+I when prompted. If required, refer the computer Maintenance and Service Guide to make available enough physical drives to create the RAID volume.

How to configure raid on HP Z series workstations?

Use the up and down arrow keys and Space to mark individual physical as members of the volume. Press Enter to exit the Select dialog and return to the Create Volume Menu dialog. If appropriate, use the up or down arrow key to select the Stripe Size in the Stripe Size: field, and then press Tab. Press Enter to initiate volume creation.

How to enable SATA RAID on hp Z600?

Use the up or down arrow key to highlight SATA RAID Option ROM Download, and then press Enter. Use the left or right arrow key to select Enable. To accept the new setting, press F10. Use the arrows to highlight File>Save Changes and Exit, and then press Enter. Press F10 when prompted.

How to configure raid in Linux workstations?

For Linux SATA RAID, refer to the Software RAID in Linux Workstations section in the HP Workstations for Linux User Guide. Single drive failure does not cause data loss (performance is compromised until the failed drive is replaced and the array rebuilt). Configure the system BIOS to enable embedded SATA RAID functionality.