By How do I reset my Smartboard projector?
Resetting the Lamp Timer
- Using the remote control, press the following buttons quickly to access the service. menu: Down, Up, Up, Left, Up.
- Scroll down to the Lamp Hour Reset field, and then press OK. Both Lamp Hour values (Standard and Economy) are reset to zero.
- Press the Menu button on the remote control.
- Select.
How do I reset my Samsung projector?
Switch on the projector and press the “MENU” button to call up the menu. Press and hold the “RESET” button for around 3 seconds. Choose “RESET” to confirm.
How do I turn on my Smart UX60?
Information
- Overview.
- When you press the SMART Hub’s Power button on your SMART Board interactive whiteboard’s pen tray, your SMART UX60 projector doesn’t turn on or off.
- Before you turn off the projector, select the State Report option in the projector’s Service menu.
Where is Reset button on SMART Board?
The Reset button is located behind the lower-right side of the interactive whiteboard (when viewed from the front). 2. To reset all components of the SMART Board interactive whiteboard, disconnect and then reconnect the USB cable.
Where is the Reset button on SMART Board 800?
Press the Reset button briefly (less than three seconds) on the bottom of the pen tray. All the pen tray indicator lights flash sequentially twice and the interactive whiteboard resets.
How do I reset my Samsung DLP TV to factory settings?
Press: Menu + 1 + 8 + 2 + Power. Your TV set should now say “Loading Factory”. Browse down to “Option” then press Enter (or the right cursor button).
How do I reset my projector?
Press the menu button on the projector or the remote control and then navigate to the Advanced Settings. 2. Select to restore factory default settings. Note: Some models may have the reset option in a slightly different location.
How much does a smart board light bulb cost?
Compare with similar items
| This item Smartboard UF65 Projector Lamp 200W 2000-Hrs | STAR-LAMP 1020991/unifi70 Replacement Projector Lamp Bulb with Housing for SMARTBOARD Unifi 70/Unifi 70w/UF70/UF70w/LIGHTRAISE 60WI2/SLR60wi2/SLR60wi2-SMP Projector | |
|---|---|---|
| Price | $5799 | $6503 |
| Sold By | Exclusive Bulbs | star station |
How do I change the bulb in my UF70 projector?
Changing the lamp on the Smart UF70:
- Remove the 1020991 lamp replacement.
- Press tab and slide new lamp into slot.
- Release tab and tighten (2) screws on the projector lamp.
- Now slide the inner cover back on along with the outer lamp cover.
How do I find the IP address of my Smartboard?
To check the IP address, press Menu on the remote control to open the on-screen menu. Highlight LAN in the Setting menu. The network’s DHCP will have automatically set the IP address. If successful, the IP address appears on the LAN page.
How do you turn off a Smartboard?
- Press the Power button. on the convenience panel or the remote control for five seconds. A slider appears on the screen.
- Move the slider to the right.
- Flick the switch beside the AC power inlet to the OFF (O) position. Wait at least 30 seconds before turning the display back on.